Table of Contents
Advertisement
Quick Links
ELECTRIC CHAINSAW
SHARPENER
Model 40208
ASSEMBLY and OPERATING
INSTRUCTIONS
NOTE: Actual product design may differ slightly from that shown in this manual.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
©
®
Copyright
2002 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
REV 05/05
Advertisement
Table of Contents
Related Manuals for Chicago Electric 40208
Summary of Contents for Chicago Electric 40208
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
-
Page 2: Specifications
Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. SKU 40208 For technical questions, please call 1-800-444-3353. Specifications 115 V, .75A (Load), Direct Drive 4200 0.80”... - Page 3 Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
-
Page 4: Additional Safety Warnings
When unpacking, check to make sure the parts listed on page 9 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. When installing the sharpener on a workbench, make sure that the Lock Wheel (18) is accessible, as shown in the mounting picture in FIGURE 1. - Page 5 Release the Lock Stop (6) and lower the Top Housing (4B). Never operate tool without the Grinding Wheel Cover in place. FIGURE 3 Top Housing (4B) SKU 40208 For technical questions, please call 1-800-444-3353. Grinding Wheel Cover (11B) Grinding Wheel (8)
-
Page 6: Operation
See FIGURE 5. The Lower Knob (26) has a Lock Nut which will determine how much material is removed. Once you set the Lock Nut, fully tighten the Lower Knob (26). SKU 40208 For technical questions, please call 1-800-444-3353. Operation Chain Stop (23) Lock Wheel (18) - Page 7 Handle (34). Turn the machine back on and continue sharpening the next tooth. Repeat this process until you have sharpened all of the links set up for this angle. SKU 40208 For technical questions, please call 1-800-444-3353. Operation (continued) Sharpening...
-
Page 8: Maintenance
A dull sound indicates a crack or break. Replace the Grinding Wheel when it grinds down to a diameter of 3 inches. SKU 40208 For technical questions, please call 1-800-444-3353. Operation (continued) -
Page 9: Parts List
THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available indi- vidually as replacement parts. SKU 40208 For technical questions, please call 1-800-444-3353. Parts List Qty. -
Page 10: Assembly Drawing
Assembly Drawing REV 05/05 SKU 40208 For technical questions, please call 1-800-444-3353. Page 10...