Page 2
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Page 2 REV 04/04 SKU 40039...
Page 3
18. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. Page 3 SKU 40039...
Page 4
When unpacking, check to make sure the parts listed on pages 5 and 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Page 4 REV 02/03 SKU 40039...
Page 5
9a - Nut Slot 10a - Blade 11a - Rod 12a - Rod Slot 13a - Fixing Screw 14a - Anti-Skid Guard Note: Add an “a” suffix when Power Cord ordering parts shown on this page. Base Page 5 SKU 40039...
Page 6
Note: If the Jig Saw comes from the factory with a protective lubricant coating, wipe it clean using a cloth. Make sure no liquid enters the motor or sawing mechanisms. Warning: Do not use the Jig Saw without the Cover (#2) in place. REV 04/04 Page 6 REV 01/03 SKU 40039...
Page 7
If necessary, remove the blade from the saw and remove the blade from the workpiece. Before replacing the blade, make sure it is in satisfactory condition. 13. When finished cutting, release the Trigger (#2a) and unplug the Jig Saw. Page 7 Rev 01/03 SKU 40039...
Page 8
Also, have an authorized service technician grease the internal parts when needed. Do not attempt to change brushes or grease the internal parts yourself. Page 8 Rev 01/03 SKU 40039...
OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Page 9 Rev 01/03 SKU 40039...