6Ch Discrete Input Mode - Panasonic SC-AK78 Operating Instructions Manual

2
1
1
2
32
RQT5289
AUTO OFF SLEEP MUTING
DISC
CH SELECT CH SELECT AV EFFECT
2
3D AI
EQ
SUPER SIMULATED
S.WOOFER PRO LOGIC
SURROUND STEREO
PROGRAM CANCEL REPEAT RANDOM
AUX1/2 TAPE TUNER CD
6 CH 6 CH
TEST
2
VOLUME VOLUME

6CH DISCRETE INPUT mode

Preparation:
If you have connected a subwoofer (not included), press and hold
[S.WOOFER] for about 2 seconds so "SUB W ON" is shown on the
display.
1. Press [6CH].
The [6CH DISCRETE INPUT] indicator lights.
2. Adjust the volume of each speaker.
Sit in the normal listening position and make the adjustments with
the remote control.
Output the test signal from the DVD player (not included).
Set the channel level to 0 dB on the DVD player, and adjust
the channel level on this system.
Press [VOLUME (– or +)].
Set the volume to the normal listening level.
The following steps are for setting the output level of the front
speakers and the other speakers to approximately the same level.
Press [CH SELECT].
Select the speaker channel to be adjusted.
L: Front speaker (Left)
C: Center speaker
R: Front speaker (Right)
RS: Surround speaker (Right)
LS: Surround speaker (Left)
SW: Subwoofer
Press [ ] or [ ].
Adjust the output level
: Increases the output level
: Decreases the output level
Repeat steps and to adjust the level accordingly.
Reference:
Add audio effects to improve the surround effect. (
Note
You cannot record sound when [6CH DISCRETE INPUT] is selected.
To record from DVDs, reconnect the DVD player (MIXED OUT) to
AUX1 or 2 terminal on this unit.
pages 35, 36)