Cd Test Mode Function - Panasonic SA-AK66 Service Manual

11 CD Test Mode Function
This CD test mode is provided to check CD unit without connecting to changer loading mechanism. This mode shall operate CD
PLAY with CD unit being connected only and CD Automatic Alignment result is shown on FL display.
11.1. How to set CD test mode
2,
Ld) Press CD.
<u, Press and hold "ml TUNE MODE" |
Se ee button for at least 2 seconds.
|\___vdloe While pressing the "ll TUNE MODE"
_ button, press ">>/erm1 MEMORY"
button for at least 2 seconds.
Display
, "CD TEST' will appear on the FL display. |
CD TEST | (unit is in the CD test mode.
11.2. CD Automatically Adjustment result indication
Under CD test mode, pressing the numeric key '0' on the remote controller will display the auto adjustment result. FLOCK, TLOCK
and CLVS status shall be shown as below:
[... OO#OO _ | ]........FL shall display as left if the Result is OK
wu SEH Adjustment result
CLVS (1 = OK, 0= NG}
TLOCK (1 = NG, 0 = OK)
- FLOCK (1 = NG, 0 = OK)
During the above display, executing CD PLAY will display auto adjustment result for CD PLAY mode.
19