Flow Of Installation - Sanyo PLC-ZM5000 Owner's Manual

Flow of installation

To use the projector via the networks, follow the setup procedures below.
STEP 1
Connect the LAN and set the configuration.
Decide depending on the LAN environment.
Detailed LAN configurations need to be done with a browser later.
First, complete the Wired LAN connection between computers and projec-
tors, then start browser configurations.
STEP 2
Network Configuration has completed.
Follow each chapter to operate the projector.
Operate and manage the projector
"2. Setup Procedures" (pp.11–16).
"3. Basic setting and operation" (pp.17–30).
"Power Control and status check"(p.32)
"Control"(pp.34-37)
"PC adjustment"(p.38)
"Setting up the projector"(pp.39-42)
"Projector information"(pp.43-44)
Flow of installation
"4. Controlling the projector"(pp.31-44)
9