Setting - Sanyo PLC-ZM5000 Owner's Manual

This projector has a Setting menu that allows you to
set up the other various functions described below.
Press the MENU button to display the On-Screen
1

Setting

button to access the submenu items.
2
button to access the selected item.
3
item and then press the SELECT button.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Russian, Chinese, Korean and Japanese.
Menu
Position
This function is used to change the position of the
On-Screen Menu. Select Position and press the SELECT
button.
The Position changes each time you press the SELECT
button as follows.
the center the bottom left
left the top right the center
Menu size
This function is used to change the display size of the On-Screen
Menu. Select Menu size and press the SELECT button.
Normal...Display the On-Screen Menu on the screen
in its normal size.
Double...Display the On-Screen Menu on the screen
in its double normal size.
Input button
This function detects the input signal automatically. When
buttons to select one of the following options.
Mode 1...... Input search will not work.
Mode 2...... Input search works under the following
situation:
– When pressing the INPUT button on the
side control or the remote control.
Mode 3...... Input search works under the following
situation:
–When turning on the projector by pressing
the ON/STAND-BY button on the side
control or pressing the ON button on the
remote control.
–When pressing the INPUT button on the
remote control or on the side control.
–When no signal is detected.
Setting
Setting
the bottom right the top
.....
Setting Menu
Language
Position
Note:
4:3
Double
Note:
Input button
Normal
Mode 3
51