Lubrication Chart - Troy-Bilt Wide-Cut 34342 Owner's Manual

Section 5: Maintenance
WARNING

Lubrication Chart

ITEM
Engine Crankcase
Front Wheel Bearings
Control Linkages/Pivots
Transmission Output Shaft
* A hand-type grease gun is recommended.
26
Before inspecting, cleaning or servicing the machine, shut off engine, wait for moving parts to stop, disconnect spark
plug wire and move wire away from spark plug. Remove ignition key (electric start models).
Failure to follow these instructions can result in serious personal injury or property damage.
INTERVAL
First 2 hours
25-50 hours
50 hours
25 hours
100 hours or Annually
LUBRICATION TYPE
Change Oil
Change Oil
(Lubrication Intervals Vary
with Operating Conditions
and Type of Oil Used)
Grease
Light Oil
Grease
AMOUNT REQUIRED
See Engine Manual
Change oil more often
in extremely dirty or
dusty conditions.
1-3 Strokes*
A Few Drops
1-3 Strokes*