Optional Antenna Connections; External Unit Connection - Panasonic SC-AK300 Operating Instructions Manual

For Australia and New Zealand
A
75
1
T
F M A N
)
2
(
G N D
1
2
3
For Europe
T
F M A N
)
(
B
For Australia and New Zealand
A M A N T
L O O P
E X T
For Europe
5 -12 m
T
A M A N
L O O P
E X T
C
R L
(R) (L)
D
OPTICAL
OUT
FM outdoor antenna
(not included)
coaxial cable (not included)
30 mm
Shield braid
15 mm
Core wire
FM outdoor antenna
(not included)
75 coaxial cable
(not included)
(For United Kingdom only)
Antenna plug
adaptor (included)
AM outdoor antenna
(not included)
5 -12 m
AM loop antenna
(included)
AM outdoor antenna
(not included)
AM loop antenna
(included)
Rear panel of this unit
Analogue player
(not included)
Rear panel of this unit
Optical fiber
cable
(not included)
Receiver
(not included)
OPTICAL
IN
Connections

Optional antenna connections

You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced concrete building, etc.
A FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is in-
stalled.
1 Remove a piece of the outer vinyl insulator.
2 Twist the shield braid.
3 Expose the core wire.
Note
An outdoor antenna should be installed by a qualified technician only.
B AM outdoor antenna
Connect the outdoor antenna without removing the AM loop antenna.
Run 5 to 12 m of vinyl-covered wire horizontally along a window or
other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to prevent
possible damage that may be caused by lightning. Never use an
outdoor antenna during an electrical storm.

External unit connection

•
Make sure that the power supply for all components has been
turned off before making any connections.
•
For details, refer to the operating instructions of the unit which are
to be connected.
•
All peripheral components and cables sold separately.
C Connecting analogue equipment
An analogue player with a built-in phono equalizer can be connected.
When units other than those described are to be connected, please
consult your audio dealer.
Connecting digital equipment to the optical
fiber out terminal
D
(For SC-AK300 except Russia, Ukraine, Australia
and New Zealand)
Connect this unit to other digital equipment with an optical fibre terminal,
such as a receiver or digital surround processor.
For your reference
If you have DTS format CDs, you can enjoy six channel playback by
connecting this unit to a receiver or digital surround processor that
has a DTS decoder.
Note
Use only the optical fibre terminal when playing back DTS format
discs. DTS signals can only be correctly output through the digital
terminal.
¡ DTS is a trademark of Digital Theater Systems, L.P.
7
RQT6131