Table of Contents
Advertisement
DVD-R/RW
≥Discs must conform to UDF bridge (UDF 1.02/
ISO9660).
≥This unit does not support multi-session. Only the
default session is played.
CD-R/RW
≥Discs must conform to ISO9660 level 1 or 2 (except for
extended formats).
≥This unit supports multi-session but if there are many
sessions it takes more time for play to start. Keep the
number of sessions to a minimum to avoid this.
USB device
≥This unit does not guarantee connection with all USB
devices.
≥This unit does not support USB device charging.
≥FAT12, FAT16 and FAT32 file systems are supported.
≥This unit supports USB 2.0 Full Speed.
Speaker installation option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to
a wall.
≥The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 kg per
screw. Consult a qualified building contractor when
attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
4.0 mm
‰
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the
hole(s).
∫ Tips
Use the measurements indicated below to identify the
screwing positions on the wall.
≥Leave at least 20 mm of space above the speaker and
10 mm on each side to allow enough space for fitting
the speaker.
A 12.3 mm
B 106.7 mm
C 40 mm
D 40 mm
At least 30 mm
7.0 mm to
9.4 mm
‰
‰
3 mm to 5 mm
Maintenance
Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this
unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Do not use commercially available lens cleaners as
they may cause malfunction. Cleaning of the lens is
generally not necessary although this depends on the
operating environment.
Before moving the unit, ensure the disc tray is
empty. Failure to do so will risk severely damaging
the disc and the unit.
23
Hide quick links:
Advertisement
Table of Contents
