Panasonic SC-XH50 Operating Instructions Manual page 20

HDMI menu
VIERA Link
≥[On]: The VIERA Link "HDAVI Control" function is
available (
≥Off
Audio Out
≥On: When audio output is from the HDMI AV OUT
terminal. (Depending on the capabilities of the
connected equipment, audio output may differ
from the audio settings of this unit.)
≥[Off]: When audio output is not from the HDMI AV OUT
terminal. (The audio is output using the settings of
this unit.)
Power Off Link
Select the desired power off link setting of this unit for
VIERA Link operation (
the settings of the connected VIERA Link "HDAVI
Control" compatible equipment.)
≥[Video/Audio]: When the TV is turned off, this unit will
turn off automatically.
≥Video: When the TV is turned off, this unit will turn off
except during the following conditions:
– audio playback ([CD] [MP3])
– radio mode
– "AV", "AUX" or "ARC" mode (non-selected TV
audio setting for VIERA Link)
TV Audio
Select the TV audio input to work with the VIERA Link
operations ( 16).
≥[AUX]
≥ARC
≥AV
Others menu
DivX Registration [DivX]
Display the unit's registration code.
You need this registration code to purchase and play
DivX Video-on-Demand (VOD) content (
DivX Deregistration [DivX]
Display the unit's deregistration code.
You need this deregistration code to cancel this unit's
registration ( 21).
This setting is only selectable after playing DivX VOD
content for the first time.
Slide Show Time
Set the speed of the slideshow.
≥[3\Seconds] ≥5 Seconds ≥10 Seconds ≥15 Seconds
Easy setup
You can execute basic settings to optimise your home
theater system. (
20
16).
17). (This works depending on
21).
9)
FL Dimmer
Change the brightness of the unit's display.
≥[Bright]
≥Dim: The display is dimmed.
≥Auto: The display is dimmed, but brightens when you
perform some operations.
Screen Saver
This is to prevent burn marks on the TV screen.
≥Off
≥[Wait\5\min]: If there is no operation for 5 minutes, the
screen saver will be shown. The TV screen
will resume when you perform some
operations. (This does not work during
playback.)
Ratings
Set a rating level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
≥1 to 7
≥[8\No\Limit]
When you select your ratings level, a password screen is
shown.
The default password is "8888".
Enter the 4-digit password with the numbered buttons,
and press [OK]8.
You can change the default password (
Do not forget your password.
A message screen will be shown if a DVD-Video disc
exceeding the rating level is inserted in the unit.
Follow the on-screen instructions.
Set Password
Change the password for "Ratings".
When you change the password for the first time:
The default password is "8888".
Follow the on-screen instructions.
Restore Default Settings
This returns all values in the Setup menu to the default
settings except the password and ratings level.
Press [2, 1]8 to select "Yes" and press [OK]8.
Turn the unit off and on again.
below)