Panasonic Lumix DMC-FX77 Operating Instructions Manual page 45

[Format]
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
[Calibration]
•
Calibration is not done if correct position is not touched. Touch the [ i ] mark again.
~ [Language]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Demo Mode]
DEMO
•
The Stabilizer function is switched between [ON] and [OFF] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
•
In Playback Mode, [Stabilizer Demo.] cannot be displayed.
•
[Stabilizer Demo.] is an approximation.
•
[Auto Demo] has no TV output capability even when it is in Playback Mode.
The built-in memory or card is formatted (Pictures in My Photo
Album are also formatted). Formatting irretrievably deletes all the
data so check the data carefully before formatting.
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Touch [Start].
2
Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3
Touch [End] to finish.
Set the language displayed on the screen.
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera's features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]
A Amount of jitter
B Amount of jitter after correction
[Auto Demo]:
[ON]
[OFF]
- 45 -
Basic
A B