Panasonic SC-BTT362 Operating Instructions Manual page 47

Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥ Check connections to speakers and other equipment.
( 12s18)
≥ Ensure the speaker settings for your speakers are correct.
( 43)
≥ To output audio from a device connected with an HDMI
cable, set "HDMI Audio Output" to "On" in the Setup menu.
( 42)
≥ When "BD-Video Secondary Audio" is set to "On", Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (
≥ Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
No surround sound effect.
≥ Press [SURROUND] to select a surround effect. (
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set
"Dolby D/Dolby D +/Dolby TrueHD", "DTS/DTS-HD" or
"MPEG Audio" to "PCM". (
No sound from the TV.
≥ Press [EXT-IN] to select the corresponding source. (
≥ When connecting the unit to a TV using an HDMI cable,
check whether the HDMI terminal on the TV is labeled
"HDMI (ARC)". If not labeled in this way, connect using the
HDMI cable in combination with an optical digital audio
cable.( 14, 15)
≥ If there is no sound from the equipment connected to this
unit's DIGITAL AUDIO IN terminal, please make sure that
the optical audio output of the equipment is set to PCM.
iPod/iPhone operation
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. (
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
≥ When unexpected operation occurs while using the
iPod/iPhone, connect the iPod/iPhone again or try to restart
the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on the TV.
≥ Make sure that TV is connected to the VIDEO OUT terminal
on this unit. ( 14)
≥ Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI
input.
≥ When the main unit is connected with an "HDAVI Control"
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[HOME] is pressed.
jRe-select the TV's VIDEO IN input channel.
39)
24)
40)
22)
34)
Radio
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. (
A beat sound is heard.
≥ Try to keep a certain amount of distance between the
antenna and the TV.
Network
I can't connect to the network.
≥ Confirm the network connection and settings. (
≥ Check the operating instructions for each device and
connect accordingly.
[BTT362]
When using Wireless LAN connection, video or audio
from the DLNA Certified media server is played back
intermittently, not played back or video frames are
dropped during playback.
≥ Higher transfer rate router such as 802.11n (2.4 GHz or
5 GHz) Wireless router may solve the problem. If you use
802.11n (2.4 GHz or 5 GHz) Wireless router, it is necessary
to set the encryption type to "AES".
Simultaneous use with a microwave, cordless telephone etc.
at 2.4 GHz may result in connection interruptions or other
problems.
≥ On the "Wireless Settings" screen (
lighting of at least 4 "Reception" indicators is the target for a
stable connection. If 3 or fewer indicators are lit or the
connection is being interrupted, change the position or angle
of your Wireless router and see if the connection state
improves. If there is no improvement, connect to a wired
network and perform the "Network Easy Setting" (
again.
Other difficulties with playback
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (
≥ You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (
≥ Some BD-Video can only be output with HDMI.
I can't play back BD-Live.
≥ The SD card is write-protected. (
≥ Confirm that this unit is connected to the broadband Internet.
( 17)
≥ Confirm the "BD-Live Internet Access" settings. (
≥ Confirm an SD Card is inserted into the SD Card slot. (
Alternative soundtrack and subtitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc's
menus to make changes. (
Angle cannot be changed.
≥ Angles can only be changed during scenes where different
angles are recorded.
18)
17, 20, 42)
42), the continuous
20)
11)
40)
11)
40)
25)
22)
VQT3M52
47