Specifications - Sony SVP-DC1 Operating Instructions Manual

Specifications

System
Format
VHS NTSC standard
Video signal
NTSC color, EIA standards
Tape speed
SP: 33.35 mm/s
3
(1 ⁄ inches/s)
8
LP: 16.67 mm/s
11
( ⁄ inches/s)
16
EP: 11.11 mm/s
7
( ⁄ inches/s)
16
Maximum playback time
6 hrs. in EP mode (with T-
120 tape)
Fast-foward and rewind
time
Approx. 4 min. 30 sec. (with
T-120 tape)
Inputs and outputs
AUDIO/VIDEO OUT
VIDEO OUT, Phono jack (1)
Output signal: 1 Vp–p,
75 ohms, unbalanced,
sync negative
AUDIO OUT, Phono jack (1)
Rated output level: –8 dBs
(0 dBs = 0.775 Vrms)
Load impedance: 47
kilohms
Output impedance: less
than 10 kilohms
AUDIO/VIDEO IN
VIDEO IN, Phono jack (1)
Input signal: 1 Vp-p, 75
ohms, unbalanced, sync
negative
AUDIO IN, Phono jack (1)
Input level: –8 dBs (0 dBs =
0.775 Vrms)
Input impedance: more
than 47 kohms
CONTROL S IN
Minijack (1)
General
Power requirements
12 V DC (10 V–16 V DC)
Power consumption
13 W
Operating temperature
5 C to 40 C (41 F to 104 F)
Storage temperature
– 20 C to 60 C (–4 F to
140 F)
Dimensions
Approx. 240 x 95 x 300 mm
(w/h/d) (Approx. 9
7
x 11 ⁄ inches) including
8
projecting parts and controls
Mass
Approx. 3.3 kg (7 lb 4 oz)
Supplied accessories
Remote commander RMT-V251
(1)
Size AA (R6) batteries (2)
Pin assignment
DC 12 V terminals
4 3
2 1
Pin No. Signal
1 POWER CONTROL
2 GND (–)
3 NC
4 +12 V
Recommended receptacle: Molex
TYPE 5557-NR
Design and specifications are
subject to change without notice.
SONY SVP-DC1 (E) 3-194-445-02 (3)
1 3
⁄ x 3 ⁄
2 4
13