Control Reference Guide; Power-Saving Features - Panasonic SC-XH170 Operating Instructions Manual

Control reference guide

Remote control
1 Turn this unit on/off (
2 Select channels and title numbers etc. / Enter
numbers ( 9, 12)
3 Cancel ( 13)
4 Source select
[DVD]: Select disc as the source (
[RADIO]: Select FM tuner (
[EXT-IN]: Select external audio as the source
( 10)
AV # AUX # ARC # D-IN # USB
^-----------------------------------------------------------------------}
5 Basic operations for play (
6 Display RDS text data / Show on-screen menu
( 9, 14)
7 Show a disc top menu (
8 Select or confirm menu items / Frame-by-frame
( 12)
9 Select the play mode / Set the repeat mode (
: Select sound mode / Turn Whisper-mode Surround
on/off ( 11)
; Select surround sound effects (
or
Set the Sleep timer
Press and hold [jSLEEP].
While the time is shown on this unit's display, press
[jSLEEP] repeatedly.
Each time you press the button:
SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120
^-------------------------- OFF (Cancel) (------------------------}
≥To confirm the remaining time, press and hold the
button again.
< TV operations
Aim the remote control at the Panasonic TV and press
the button.
[TV, Í]: Turn the TV on/off
[INPUT, AV]: Change the TV's video input mode
[r, VOL, s]: Adjust the TV volume
This may not work properly with some models.
= Adjust the volume of this unit
> Mute the sound
≥"MUTE" flashes on this unit's display while the
function is on.
≥To cancel, press the button again or adjust the
volume.
≥Muting is cancelled when you switch the unit to
standby.
? Select radio stations manually (
@ Select preset radio stations (
A Exit the display
B Show START menu (
C Show a disc menu (
4
8)
12)
9)
12)
12)
13, 14)
11)
9)
9)
9)
12)
D Return to previous screen (
E Switch information on this unit's display (
F Select speaker channel (
Avoiding interference with other Panasonic
equipment
Other Panasonic audio/video equipment may start
functioning when you operate the unit using the supplied
remote control.
You can operate this unit in another mode by setting the
remote control operating mode to "REMOTE 2".
This unit and remote control must be set to the same
mode.
1 Press [EXT-IN]4 to select "AUX".
2 Press and hold [< OPEN/CLOSE]2 on this unit and
[2] on the remote control until this unit's display shows
"REMOTE 2".
3 Press and hold [OK]8 and [2] on the remote control for
at least 2 seconds.
To change the mode back to "REMOTE 1", repeat the
steps above by replacing [2] with [1].
This unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Open/Close the disc tray (
3 Adjust the volume of this unit
4 Power indicator
The indicator lights when this unit is turned on.
5 Disc tray
6 Connect USB device (
7 Remote control signal sensor
8 Display (FL display)

POWER-SAVING FEATURES

This unit is designed to conserve its power
consumption and save energy.
∫ Auto power-down function
≥This unit will automatically switch to standby mode
after 30 minutes of inactivity.
e.g.
–There is no audio signal from an external device.
–Media playback is stopped/paused.
–The disc menu is displayed and play is not selected.
(This function may not work depending on the
application type of discs.)
≥When this unit is turned back on, "POWER ON
FROM AUTO POWER DOWN MODE" appears on
this unit's display.
12)
12)
12)
12)
17)