Samsung MIM-B17 User Manual page 138

System Settings (Continued)
138
E-
6 Tracking completed message will appear.
Select Zone initialization mode you want and click [OK].
 Not initialize: No zone information initialization will be
made.
 Initialize individually: Initialize zone information as
 Initialize by group: Initialize zone information as group
Note  If tracking is executed successfully when interface
module is set for communication mode setting by
channel, virtual centralized controller will be assigned
to each channel.
 For about centralized controller's address, address
11~15 will be assigned to channel 0~4 for each.
 If there is interface module communication channel,
tracking for centralized controller will be restricted
for the centralized controller which are in the range of
0~10.
 If there is no searched interface module, centralized
controller, and SIM/PIM, it is regarded as DVM tracking
failure.
 If there are devices which have same address, first
searched device will be registered only.
 The number of centralized controller contains the
number of virtual centralized controller which is used
in interface module communication.
 The number of indoor unit contains the number of
indoor unit, ERV, AHU, and GHP.
 If you execute tracking, system setting will be initialized.
 If tracking result does not match with actual installation
information, there can be critical error in additional
functions such as power distribution.
 Make sure that tracking information matches to actual
installation information after tracking.
individual mode.
mode.