Samsung MIM-B17 User Manual page 126

System Settings (Continued)
126
E-
5 Click [OK] when "This information will be modified. Do you
want to proceed?" message appears.
6 "Reading data from DMS2. Please wait." message appears
and saving is completed. Afterwards, system environment
setting screen appears again with all items are disabled.
 If at least one of indoor unit is turned on, contact point
output port 1 generates contact point signal.
 If there is breakdown, contact point output port
2 generates contact point signal.
Note  Pattern 1 is set as factory setting of contact control
pattern.
 Contact output
- When indoor unit is in operation, DMS2 which
executed tracking successfully outputs signal through
DO Ch1.
- If there is unsolven breakdown in DMS2, signal will
be output through DO Ch2. You can check it through
check indicator on DMS2.
For extension, DMS2 has 10 DI/DO ports. Contact control
and output function are assigned to Ch1 and Ch2. Ch3~Ch10
will be assigned to additional functions.
For proper contact control, connect using Ch1 and Ch2.