Timer Recording - Panasonic NV-SV121 Series Operating Instructions Manual

Timer recording

Timer recording Timer recording 1 / 3 1 / 3
Pos Pos Date Date Start Stop Start Stop
1 ARD 31/12 10:30 11:30 SP ON 1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11:30 12:30 SP ON 1 ARD 31/12 11:30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP ON 2 ZDF 31/12 12:30 13:30 SP ON
4 RTL 31/12 13:30 14:30 SP ON 4 RTL 31/12 13:30 14:30 SP ON
6 VOX 31/12 14:30 15:30 SP ON 6 VOX 31/12 14:30 15:30 SP ON
-- - - - - - -/ - - - -:- - - -:- - SP - - - -- - - - - - -/ - - - -:- - - -:- - SP - - -
: ENTER ENTER :
:select select : store store
CANCEL CANCEL : EXIT EXIT :
: delete delete : exit exit
SV121 HV61 HV51 MV21 MV16
The Timer recording allows you to programme the recording time of TV programmes
up to 1 month in advance. Use the on-screen menu to programme a maximum of 16
recordings.
Press PROG/CHECK and select a free storage position
VPS VPS
Confirm with ENTER.
PDC PDC
Select a station
Then enter start- and stop-time
Hold buttons down to change time in 30-minute steps.
Select tape speed: A (Automatic), SP, LP, EP
The VPS/PDC settings may be changed with
Press ENTER to save timer programme.
Repeat these steps for further recordings you may wish to programme.
Press TIMER to activate the VCR´s timer mode.
Make sure the VCR symbol
Do not forget to verify that there is enough tape left. The length of the recording
must not exceed the tape left on the video cassette.
Quitting the timer mode
TIMER
Press TIMER, the VCR symbol
You can now play back a cassette or make a manual recording. Press TIMER
again to reactivate the previously entered timer programme.
, and use to set date, week or weekday
, .
is displayed.
will turn off.
.
.
, .
(does not apply to HV51, MV16).
21