Menu Others - Panasonic NV-SV121 Series Operating Instructions Manual

Menu Others

SV121
Others
Tape length : AUTO ( E-240)
AV2 : DECODER
AV2 IN : VIDEO
AV1 OUT : VIDEO
TV system : AUTO
S-VHS playback : AUTO
OSD : 4 : 3
HV61 HV51EC
Others
Tape length : AUTO( E-240)
AV2 : DECODER
TV system : AUTO
SQPB : AUTO
OSD : 4 : 3
Power save : OFF
VCR display : DIMMED
HV51EG MV21 MV16
Others
Tape length : AUTO ( E-240)
TV system : AUTO
SQPB : AUTO
OSD : 4 : 3
Power save : OFF
VCR display : DIMMED
EXT LINK : 2
18
Tape length
1 / 2
AV2
AV2 IN
AV1 OUT
1 / 2
TV system
S-VHS playback
OSD
SQPB
Sets the tape length of the cassette you use.
AUTO
( ),
E - 240 E - 195, E - 260, E - 300
Selects the type of external unit connected to the VCR's
DECODER : If a decoder is connected.
EXT : If another video recorder or satellite receiver is connected.
Allows you to record the S-Video signal of an external unit connected
to the video recorder's AV2 socket.
VIDEO : If the unit does not support S-VIDEO.
S-VIDEO : If the unit supports S-VIDEO.
To connect use a 21-pin scart cable.
VIDEO : Video signal via the 21-pin scart cable.
S-VIDEO : S-Video signal via the 21-pin scart cable.
AUTO : Automatically detects PAL or MESECAM.
PAL : If you are using the PAL system.
MESECAM : If you are using the MESECAM system.
AUTO : The VCR automatically detects the type of recording.
ON : Plays back S-VHS format cassettes in the S-VHS format only.
OFF : Plays back cassettes recorded in VHS format only.
4:3 : Displays appear at the edge of the screen
(displays not visible on 16:9 format screens).
WIDE : Displays appear at the edge of the screen
(displays appear in the middle on 4:3 format screens).
OFF : No on-screen displays.
AUTO : The VCR automatically detects the type of recording.
ON : Plays back S-VHS format cassettes in quasi S-VHS format.
OFF : Plays back cassettes recorded in VHS format only.
AV2 socket.