Display Messages - Sharp UX-BS60 Operation Manual

Caller ID (Requires Subscription to Service)
How Caller ID operates
When you receive a call, the name and phone number of the caller will appear
in the display, beginning just before the first ring. The information will continue
to be displayed until the line is disconnected.
Display example
5258693
JOHN DOE
Note: Some caller ID services may not provide the name of the caller. In this
case, only the phone number will appear.

Display messages

One of the following messages will appear while the fax rings if caller
information is not available.
NO SERVICE
CALLER-ID ERROR Noise on the telephone line prevented reception of
OUT OF AREA
WITHHELD
100
Caller's number
Caller's name
No caller information was received from your telephone
company. Make sure that the telephone company has
activated your service. This message will also appear
instead of Caller ID information if a call comes in while
you are recording an OGM or memo, or are playing
back recorded messages. If the call happens to be
from your SMS center, SMS message reception will not
be possible at this time.
caller information.
The call was made from an area which does not have a
caller identification service, or the caller's service is not
compatible with that of your local phone company.
Caller information was not provided by the telephone
company at the caller's request.