Making Copies - Sharp UX-P110 Operation Manual

4. Making Copies

Your fax machine can also be used to make copies. Single and multiple copies
(up to 99 per original) can be made.
1
Load the document face down.
If desired, press
resolution and/or contrast.
(The default resolution setting for
copying is FINE.)
2
If desired, select an enlarge/reduce setting, and/or select the number of
copies per original:
ENLARGE/REDUCE: Press
in the display. Settings are 100%, 125%, 135%, 50%, 73%, 88%, 94%, and
AUTO. (The default setting is 100%.)
Example: Press
Number of copies per original: Press the number keys to enter a number
from 1 to 99. (The default setting is 1.)
Example: Press
3
When you are ready to begin copying, press
If MEMORY IS FULL appears...
If the memory becomes full while a document is being scanned, MEMORY IS
FULL and SEE MANUAL will alternately appear in the display and the
document will automatically feed out. This may happen if the resolution is set
to SUPER FINE, or if you selected an enlarge/reduce setting, or if you are
making more than one copy per original. To avoid using memory, use
STANDARD or FINE for the resolution, 100% for the enlarge/reduce setting,
and make only one copy per original.
RESOLUTION/
to set the
RECEPTION MODE
or
twice
RATIO: 125%
for five copies
5
READY TO SEND
until the desired setting appears
5
COPY/HELP
.
47