Connecting The Telephone Line Cord - Sharp UX-53 Operation Manual

Connecting the telephone line cord

Insert one end of the line cord into the socket on the back of the machine
marked TEL. LINE. Insert the other end into a wall telephone socket.
Note:
If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
Dial mode setting
The dial mode setting is used to select the dial mode (tone or pulse). Tone
dialling is initially selected. Only tone dialling can be used in your country
or region.
If the setting has been accidently changed and you need to change it back to
tone dialling, follow the steps below.
1
Press once and
2
Press 4 times.
3
Press to select tone dialling.
1
•
Only tone dialling should be selected. The pulse dial settings are not for
use in your country or region.
4
Press to exit.
once.
4
Connections
Display:
OPTION SETTING
DIAL MODE
11