Selecting Temporary Fax Settings - Sharp AM-300 Online Manual

Selecting Temporary Fax Settings

Selecting Temporary Fax Settings
You can adjust one or more of the following temporary fax settings before
pressing
Resolution
The following resolution settings are available for faxing:
STANDARD
FINE
SUPER FINE
HALF TONE
To select a resolution setting, press
the display and then press
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Contrast
Three contrast settings are available for faxing: LIGHT (for dark originals),
NORMAL, and DARK (for faint originals).
To adjust the contrast, press
display and then press
80
to begin transmission.
Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
Use FINE for documents containing small letters
or fine drawings.
Use SUPER FINE for documents containing
very small letters or very fine drawings.
Use HALF TONE for photographs and
illustrations. The original will be reproduced in
256 shades of gray.
.
ENTER
CONTRAST
.
ENTER
QUALITY
until the desired setting appears in
until the desired setting appears in the