Sharp AM-300 Online Manual page 78

2
Place the original on the document glass or in the auto document
feeder.
Using the document glass:
Open the document glass cover and place
the original face down on the glass with
the top edge against the document guide.
•
Make sure the centre of the original is
aligned with the centre mark on the
document guide, and then close the
cover.
Using the auto document feeder:
Adjust the document guide to the width of
your original(s), and then insert the
originals face up into the feeder.
•
Up to 20 A4-size sheets can be
inserted at once.
•
For detailed information on using the
auto document feeder and the types of
originals that can be used, see pages
65 to 67.
♦
If an original is placed in both the auto document feeder and on the
document glass, the original in the auto document feeder will be faxed.
♦
When the document glass is used to send a fax, the document image
printed by the receiving machine may be reduced slightly more than when
the auto document feeder is used, and there may be a slightly larger
margin at the bottom of the page (this will depend on the size of paper
used by the receiving machine).
Sending a Fax
71