Sharp AM-300 Online Manual page 25

Installation
Important:
♦
The facsimile function of this machine is not designed for use on a line
which has call waiting, call forwarding, or certain other special services
offered by your telephone company. If you attempt to use the facsimile
function in conjunction with any of these services, you may experience
errors during transmission and reception of facsimile messages.
♦
The facsimile function of this machine is not compatible with digital
telephone systems.
Setting the dial mode (AM-400/Russia and Poland only):
If you are on a tone dial line, the dial mode must be set to TONE. If you are on
a pulse dial line, the dial mode must be set to PULSE.
♦
In Russia the dial mode is initially set to PULSE.
♦
In Poland the dial mode is initially set to TONE.
If you need to change the dial mode setting, follow the steps below.
Note: In all other countries, the dial mode setting is fixed at TONE and cannot
be changed.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Select the dial mode:
TONE:
5
Press
18
) and then press
.
.
PULSE:
repeatedly to exit.
MENU
.
Display:
FAX SETTING
1: DATE&TIME SET
1:TONE