Sharp AR-250 Operation Manual page 89

A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Misfeed in paper trays 1 and 2
Open the right side cover.
1
Hold the handle and gently open the cover.
If any paper is set in the bypass tray, remove the paper and close
the bypass tray before opening the right side cover.
Remove the misfed paper.
2
Be careful not to tear the misfed paper during removal.
If the paper cannot be seen from the side, pull out the
3
paper tray which was in use and remove the misfed
paper.
Be careful not to tear the misfed paper during removal.
NOTE:
When the paper was misfed in tray 2 and the paper has dropped
beyond the tray, remove the tray and remove the misfed paper. To
remove the paper tray, pull the paper tray out until it stops and then
lift and remove the paper tray.
Close the paper tray and the side cover.
4
Confirm that the misfeed display is cleared.
MISFEED REMOVAL
5-5