Table of Contents
Advertisement
uSiNg ThE TouCh CoNTRol SENSoRS
To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If
your finger is too flat on the panel, an adjacent sensor may be actuated as well.
SwiTChiNg ThE AppliANCE oN
1. Touch the Lock control
2. The appliance is switched on using the on/off control
Touch the on/off control
The digital displays will show
After the on/off control
your appliance, a heat setting must be selected within approximately 10
seconds. Otherwise, the appliance will switch itself off for safety reasons.
sensor for approximately 3 seconds.
sensor for 1 second.
.
sensor has been actuated to switch on
sensor.
approx. 1 sec.
hob use _17
Advertisement
Table of Contents
