Power Sources; Setting The Clock - Samsung RCD-S70 Instruction Manual

Power Sources

B
House Current
AC power cord (supplied)
Batteries
12V ; D, R20, size X 8
For critical recordings or disc playing
Operating the unit using the AC power is recommended.
Note: If the battery power is low, "BATT-LOW" will be displayed during playback and the
playback will stop.
The unit will not operate from the internal batteries while the AC power cord is
connected to the unit.
Be sure to install batteries ("AA" x 3) to prevent the program preset in the memory
and the active countdown of the Timer from being cleared accidently in case of
power failure of disconnection of the power cord.
5
1 to AC IN
230V
2 to wall outlet
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
CLOCK BATTERY
4.5V; AA,Size X 3

Setting the Clock

1 2,4,6 3,5
1
Press Clock /Timer twice.
Result: CLOCK is displayed.
2
Press Program/Set.
Result: The hour flashes.
3
To... Press...
Increase the hours
Decrease the hours
4
When the correct hour is displayed,
press Program/Set.
Result: The minutes flash.
5
To... Press...
Increase the minutes
Decrease the minutes
6
When the correct time is displayed, press
Program/Set.
Result: The clock starts and is displayed, even
when the system is in standby mode.
You can display the time, even when you are using another function, by press-
ing Clock/Timer once.
6
GB