Repeat A B Function; Programming The Order Of Playback - Samsung RCD-S70 Instruction Manual

Repeat A B Function
B
Repeat A B button
When you select CD(TAPE) Repeat A B playback, the music passages to
which you were listening is repeated 3 times.
1
Press CD( ) or TAPE button.
Result: The CD(TAPE) player starts playing.
2
Press Repeat A B button .
Result: A Time is memorized.
3
Press Repeat A B button .
Result: B Time is memorized.
Your selected passages are repeated 3 times.
4
When you have finished the Repeat playback, Press Repeat A
When setting the Repeat A B function during tape playback, an end point B
cannot be set within seven seconds after setting the start point A.
15

Programming the Order of Playback

Power
Surround Mute
Counter
Sleep Reset EQ
TAPE
Repeat A B
Repeat
REC/Pause CD SYNC A B Deck A/B
CD
button
Repeat +10
Program/ VOL. Random
Set
Mode
VOL.
Mono/ST Band
You can decide:
The order of the track desired to listen
The track not desired to listen
1
Press Program/Set.
Result: The following indications are displayed:
2
Select the required track by pressing:
3
Press Program/Set to confirm your selection.
B .
Result: The selection is stored and is displayed.
4
To select other tracks, repeat Steps 2 to 3.
5 1,3,6 2
Sleep
REC/Pause CD SYNC
Repeat
Program/
Set
Mono/ST
A maximum of up to 24 order of tracks desired to listen may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat function.
program no. Track Track no.
to move back through the tracks
or
to move forward through the tracks
or
16
GB
Power
Surround
Mute
Counter
Reset EQ
TAPE
Repeat 5
A B Deck A/B
CD
1,3 ,6
+10
VOL. Random
Mode
VOL.
2
Band