Power Sources - Samsung RCD-S50 Instruction Manual

Power Sources

House Current
Voltage selector(option)
Adjusting the voltage(only for the models equipped with
the VOLTAGE SELECTOR at the back)
Be sure to set the VOLTAGE SELECTOR (inside the battery
compartment) to your local power supply.
Batteries
12V; D, DM, UM-1, R20, HP2....., size X 8
For critical recordings or disc playing
Operating the unit using the AC power is recommended.
Note: The unit will not operate from the internal batteries while the AC power cord
is connected to the unit.
Be sure to install batteries ("AA" x 3) to prevent the program preset in the
memory and or the active countdown of the Timer from being cleared
accidently in case of power failure of disconnection of the power cord.
Back-Light Feature
On turing the power on, the light on the function display comes on. This feature helps
you to check the operation of the unit even in the dark. (However, while the power is
supplied by the batteries, the light on the display does not turn on.)
0 1
BEAT-CUT
CLOCK BATTERY 4.5V; AA,Size X 3
4
1 to AC IN 2 to wall outlet
AC power cord (supplied)
VOLTAGE SELECTOR
220-240V
110-127V
GB