Listening To The Radio; Searching For And Storing The Radio Stations - Samsung RCD-S70 Instruction Manual

Listening to the Radio

B
1
2 3
1
Select the required frequency band by pressing
TUNER/BAND.
2
Press the TUNING( , ) button.
3
Press the Volume button.
To improve broadcast reception.
Reorient the antenna for FM.
Reorient the player itself for AM(MW) .
For FM
For AM(MW)
7

Searching for and Storing the Radio Stations

Power
Surround Mute
Counter
Sleep Reset EQ
TAPE
Repeat
REC/Pause CD SYNC Deck A/B
A B
CD
Repeat +10
3
Program/ VOL. Random
Set
Mode
1
VOL.
Mono/ST Band
2
15 FM stations
15 AM stations
1
Select the required frequency band by pressing
TUNER/BAND on the front panel or Band on the
remote.
2
To search for a station...
Manually
Automatically
PRESET function is explained in detail in the section "Selecting a Stored Station" on.
3
Select the station to be stored by:
Pressing
To scroll through the frequencies faster when searching manually, hold down the
The automatic search procedure may stop on a frequency that does not correspond to a
radio station. If this happens, use the manual search mode.
4
If you do not want to store the radio station found, revert to Step 3 and search for another station.
Otherwise:
a Press Program/Set.
Result: The MEMORY is displayed for a few seconds.
b Press
c Press Program/Set to store the radio station.
Result: MEMORY is no longer displayed and the station is stored.
5
To store any other radio frequencies required, repeat Steps 3 to 4.
The PROGRAM function can be used to assign a new station to an existing
program number.
1 4 2 3
Power
Surround Mute
Counter
Sleep Reset EQ
TAPE
Repeat
REC/Pause CD SYNC A B Deck A/B
CD
Repeat +10
Program/ VOL. Random
Set
Mode
VOL.
Mono/ST Band
Press Mode button
One or more times until MANUAL is displayed.
One or more times until AUTO is displayed.
or buttons to increase or decrease the frequency respectively.
or buttons.
or to assign a program number between 1 and 15.
8
GB GB
4
2
1