Cd Synchro Function; Timer Function - Samsung RCD-S70 Instruction Manual

CD Synchro Function

B
2 1
1
Insert a cassette to Deck B.
Push Eject
2
Place the CD on the tray.
With the label facing UP.
3
Press the CD Synchro button on the remote control.
When stopped, press the button to start the recording from the first
piece of music.
Press CD Synchro button on the remote control during the playback of
CD to start the recording from the first part of the music being played.
4
To stop recording, press STOP ( ).
23

Timer Function

Power
Surround
Mute
1
Counter
Sleep Reset EQ
TAPE
Repeat 3
REC/Pause CD SYNC A B Deck A/B
CD
Repeat +10
8
Program/ VOL. Random
Set
Mode
VOL.
Mono/ST Band
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Press Clock/Timer until 'TIMER' is displayed.
2
Press Program/Set.
Result: ON TIME is displayed for a few seconds, fol-
lowed by any switch-on time already set; you
can set the timer switch-on time.
3
Set the timer switch-on time.
a Set the hour by pressing
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing
d Press Program/Set.
Result: OFF TIME is displayed for a few seconds,
3,4,5,6
2,3,4,5,7
8
Power
Surround Mute
Counter
Sleep Reset EQ
TAPE
Repeat
REC/Pause CD SYNC A B Deck A/B
CD
2,3,4,5,7
Repeat +10
Program/ VOL. Random
Set
Mode
VOL.
3,4,5,6
Mono/ST Band
or button.
or button.
followed by any switch-off time already set;
you can now set the timer switch-off time.
24
GB