Table of Contents
Advertisement
Display
(All factory default settings are indicated with underlined text.)
\
Language
§1
Choose the language for these menus and on-screen messages.
[English]
[Deutsch]
[Česky]
[Slovenčina]
On-Screen Messages
Choose the approximate time until the digital channel information
screen (
17) disappears automatically.
The length of time the control panel (
be changed, but "Off" does not work.
[Off] (The digital channel information is not displayed.)
[3 sec.]
[5 sec.]
FL Display
Changes the brightness of the unit's display.
This setting is fixed with "Automatic" if you set "Power Save" (
to "On".
[Bright]
[Dim]
[Automatic]
The display turns dark during play and disappears
when the unit is turned off. When Power Save
settings (
69) are "On", power consumption while
in standby mode is reduced.
Pause Live TV Icon
Select "Off" if you do not want to have the unit show the on-screen
icon while using the Pause Live TV function.
[On]
[Off]
Screen Saver
[On]
When this unit is not operated for approximately 5 minutes
while the screen is being displayed, the screen saver is
displayed. To return to the previous screen, press [OK].
[Off]
Teletext Character Set
Select Teletext language.
[West]
English, French, German, Greek, Italian, Spanish,
Swedish, Turkish, etc.
[East1]
Czech, English, Estonian, Lettish, Rumanian,
Russian, Ukrainian, etc.
Czech, Hungarian, Lettish, Polish, Rumanian,
[East2]
§2
Slovak, etc.
FUNCTION MENU Display
[On]
When the unit is turned on, FUNCTION MENU will be
displayed. (
5)
[Off]
The default language will be same as the language of the country
§1
selected in the Country Setting of Auto-Setup.
When "Česká republika" or "Slovensko" is selected in the
§2
Country Setting of Auto-Setup
[Français]
[Italiano]
39) is displayed can also
[7 sec.]
[10 sec.]
8)
Connection
(All factory default settings are indicated with underlined text.)
Depending on the connected equipment, some items may be
shaded in grey on the display and cannot be selected, or you may
not be able to change the settings.
TV Aspect
Set to match the type of television connected.
[16:9]
When connected to a 16:9 widescreen television.
[Pan & Scan] When connected to a 4:3 aspect
television, side picture is trimmed
for 16:9 picture.
[Letterbox]
When connected to a 4:3 aspect
television. 16:9 picture is shown in
the letterbox style.
Progressive
You can enjoy progressive video by connecting this unit's
COMPONENT VIDEO OUT terminals to an LCD/plasma television
or LCD projector compatible with progressive scan.
This setting is fixed with "Off" if you set "AV1 Output" to "RGB 1
( without component )" or "RGB 2 ( without component )".
[On]
[Off]
Note
≥When connected to a regular television (CRT: Cathode ray tube)
or a multi system television using PAL mode, even if it is
progressive compatible, progressive output can cause some
flickering. Turn off "Progressive" if you are concerned about it
(
57).
≥Picture will not be displayed correctly if connected to an
incompatible television.
TV System
Change the setting to match the equipment you are connecting
with, or to match the title when there are both PAL and NTSC titles
on the HDD.
[PAL]
≥Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as
PAL 60.
≥Select to record television programmes and PAL input
from other equipment.
≥[HDD] Select when playing a PAL input title recorded on
the HDD.
[NTSC]
≥Select when connecting to a NTSC television.
Television programmes cannot be recorded properly.
≥Select to record NTSC input from other equipment.
≥[HDD] Select when playing a NTSC input title recorded
on the HDD.
Note
≥This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD.)
≥If "NTSC" has been selected, the TV Guide system cannot be
used.
≥During recording, timer recording standby or EXT LINK standby,
this unit cannot play discs or titles that do not match the "TV
System" (PAL/NTSC) setting. It is recommended "TV System" be
set to match the discs or titles before playing them.
To change the setting all at once (PAL
While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the
main unit at the same time for 5 or more seconds.
NTSC)
!#
RQT9313
67
Hide quick links:
Advertisement
Table of Contents
