Step 1 Connection - Panasonic Diga DMR-EX72S Operating Instructions Manual

1
STEP
Using a 21-pin Scart cable
≥You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
≥You can enjoy high-quality viewing by connecting the unit to an RGB compatible television (
Required setting
"AV1 Output" in the Setup menu (
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Confirm connections not listed below with your dealer.
≥Refer to "Additional connections" (
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off
[approx. 0.9 W ("Power Save" is set to "On")]
Connecting a television
Satellite dish
Television's rear panel
Aerial cable
RQT9313
6
Connection
68)
71) for connection using other terminals and connection with other equipment.
AV
2
1
Fully wired
21-pin Scart
cable
Common Interface (CI) slot
In order to view or record TV services, you
must insert a certified CAM and Smart Card
into this slot.
≥Insert the CAM before connecting a fully
wired 21-pin Scart cable with this unit.
( 7)
Connect the unit directly to the television
If you connect the unit through an AV selector or video cassette recorder to
the television, video signal will be affected by copyright protection systems
and the picture may not be shown correctly.
≥When connecting to a television with a built-in VCR
Connect to the input terminals on the television side if there are
both television and VCR input terminals.
Connecting a terminal other
than the 21-pin Scart terminal
( 7, 71)
38).
86).
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all
other connections are
3
complete.
Cooling fan
AC IN
This unit's rear panel
DO NOT
Television
This unit
VCR