General; Display Position Adjustment - Panasonic CQ-VA7800N Operating Instructions Manual

In-dash 7 inch wide color lcd tv with receiver
Table of Contents

Advertisement

General

E
N
G
L
[VOL}] [VOL{]
I
[
S
H
ASPECT
ASP
CQ-VA7800N
9
IN-DASH 7 INCH WIDE COLOR LCD TV WITH RECEIVER
VOL
VOL
VOL
VOL
MUTE
MUTE
MUTE
MUTE
NAVIGATION
P • MODE
SCROLL
LOUD
NAVI
DISP
P
SCRL
[MUTE]
[MODE]
(LOUD)
(POWER)
[PWR]
(Power)
[MODE]
[MUTE]
(LOUD)
[}] [{] (VOLUME)
Display Open/Close
OPEN: Press [
] (OPEN/CLOSE).
CLOSE: Press [
] (OPEN/CLOSE) again.
Notes:
¡When the display unit is opened or closed, a loud
beep sounds three times.
¡If the unit stops halfway, press [
] (OPEN/CLOSE)
again and draw it all the way in.
¡Opening/closing the display can also be done when
the power is off.
Warning:
¡Do not touch the unit while the display is mov-
ing. Inserting hands, fingers or foreign objects
into the unit can cause injuries and damage to
the unit.
¡Keep babies and children away from the unit.
18
CQ-VA7800N
] (OPEN/CLOSE)
TILT
OPEN / CLOSE
DISC
CHANNEL/
TRACK
POWER
ENTER
MODE
MODE
MENU
Power
Turn your car's ignition key to ACC or ON position.
ON: Press [MODE] (POWER) on the display unit.
Press [PWR] or [MODE] on the remote control.
OFF: Press [MODE] (POWER) again for more than 2
seconds on the display unit.
Press [PWR] again or [MODE] again for more than 2
seconds on the remote control.
Mode
Press [MODE] to change the mode.
TV
VTR 1 *
1
VTR 2 *
1
AM/FM (Radio)
CH-C (CD Changer/Video CD
Changer Control) *
2
*
VTR1/VTR2 can be skipped when no external devices
1
are connected.
(a
page 32)
*
2
Selectable only when the CD Changer or Video CD
Changer are connected.
Volume
[VOL}]: Increase
[VOL{]: Decrease
Setting Range : 0 to 40
Note: The volume level can be set independently for each source.
(For radio, one volume setting for AM, one volume setting for all FMs)
Mute
MUTE ON: Press [MUTE].
MUTE OFF: Press [MUTE] again.
Loudness
When listening at low or medium volume, enhance bass and treble tones.
LOUD ON: Press and hold [MUTE] (LOUD) for more than 2 seconds.
LOUD OFF: Press and hold [MUTE] (LOUD) for more than 2 seconds
again.
Note: The setup is the same way as the one from MENU.
Refer to "Sound Settings" for details.
(a
Cautions:
¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
¡Avoid physical shock on the display.
ASPECT
ASPECT
ASP
(a
page 20)
VOL
VOL
VOL
MUTE
MUTE
MUTE
LOUD
(a
page 22)
(a
page 22)
(a
page 24)
(a
page 26)
page 36)

Display Position Adjustment

Tilt Angle
[TILT]
TILT
Press and hold [TILT] on the display unit for more than
1
2 seconds.
Press []] or [[] to adjust.
2
The setup is the same way as the one from MENU.
Refer to "User Settings" for details.
Notes:
¡Vertical angle (TILT) data are saved in the memory, so when
the display unit is drawn out next, it is automatically set at
TILT
the angle adjusted before.
CQ-VA7800N
OPEN / CLOSE
CQ-VA7300N
DISC
¡After adjusting its angle, also adjust the brightness to make
IN-DASH 7 INCH WIDE COLOR LCD TV WITH RECEIVER
CHANNEL/
TRACK
it easy for you to watch.
NAVIGATION
P • MODE
SCROLL
POWER
ENTER
NAVI
DISP
P
SCRL
MODE
MENU
¡The car model and installation condition may impose some
restrictions on the adjustment of the display's angle.
[] ] [[ ]
Caution: Do not interfere with the movement of the dis-
(Adjust)
play. Do not change the position of the unit forcibly.
[] ] [[ ]
(Adjust)
Folding Down the Display
Temporarily
Fold Down: Press [TILT] on the display unit.
Raise: Press [TILT] again on the display unit.
Note: Even when the unit is power off, you can fold down the
display temporarily.
Cautions:
¡ Do not place any object on the display unit, or subject it
to undue force.
¡ Do not move the display forcibly.
¡ The monitor movable range may be limited by a type of
car, a position where the display is mounted, etc.
E
N
G
L
I
S
H
10
(a
page 28)
(a
page 38)
19
CQ-VA7800N

Advertisement

Table of Contents
loading

Table of Contents