Tv Tuner - Panasonic CQ-VA7800N Operating Instructions Manual

TV Tuner

E
N
G
L
Channel number
I
S
ASPECT TILT
H
11
ASPECT
ASP TILT
CQ-VA7800N OPEN / CLOSE
CQ-VA7300N
IN-DASH 7 INCH WIDE COLOR LCD TV WITH RECEIVER
VOL VOL VOL MUTE MUTE
POWER
LOUD NAVIGATION P • MODE SCROLL
ENTER
NAVI DISP P SCRL MODE MODE MENU
Mode display [MODE]
Sub-LCD Display
Mode display
"Sub-LCD Display Change" (a page 44)
[MODE]
[0] - [9], [ ] (A)
(Direct channel selection)
[] ] [[ ]
(Channel)
[}] [{]
(Preset memory)
20
CQ-VA7800N
Preparation:
¡To receive TV broadcasts, install the TV antenna
(CL-T60EW, option) .
¡ For receiving TV broadcasts, stop your car where
there is no obstacle to broadcast reception around.
¡ It is required to perform area setting depending on
your country and area before receiving TV broad-
casts. ("Country and Area Selection"
Preset channels
DISC
CHANNEL/
TRACK
[] ] [[ ] (CHANNEL)
[}] [{] (Preset memory)
TV Mode
1
Press [MODE] to change to TV mode.
Channel Selection
2
[[] (CHANNEL): Up
[]] (CHANNEL): Down
Channel Search
Press and hold for more than 0.5 seconds then
release.
[[] (CHANNEL): Up
[]] (CHANNEL): Down
Searching will automatically stop when the signal of
the next broadcast channel is received.
Direct Channel Selection
(Only for remote control)
Enter a channel number by pressing [0] to [9].
Example: Channel Number 17
Press [1] and [7].
If "A" is included in channel numbers.
In some countries or areas, "A" is included in channel
numbers. In such cases, press [ ] on the remote control.
Example: Channel Number 1A
1 Press [1].
2 Press [ ] (A).
This function can search for channels automatically. Up to 18 channels can be stored.
a page 42)
Auto Preset
Memory
Preset Channel
Calling
Preset Channels
Press and hold [}] or [{] for more than 2 seconds.
[}]: channel search in ascending order
[{]: channel search in descending order
¡A stored channel can be renewed every time you store another channel.
¡The unit may receive a channel that has poor-quality images depending
on broadcasting conditions.
¡The search returns to the start position if there is no receivable chan-
nel.
* "–" appears if the number of receivable channels is less than 18.
Press [}] or [{] to select the channel.
CQ-VA7800N
E
N
G
L
I
S
H
12
* See below
21