Table of Contents
Advertisement
General
[VOL] (Volume)
Power On/Off
Set your car's ignition switch to the ACC or ON
position.
Power on: Press [POWER].
Power off: Hold down [POWER] for more
than 1 second.
One-Hour Timer
With the ignition off, pressing the [POWER] on
this unit will turn on the receiver and activate the
receiver's one-hour timer. The receiver will turn off
automatically after one hour.
Source Selection
Press [SRC] to change the source.
d
d
d
When device connected to the front AUX terminal of
this unit, the sound of connected audio device can be
output from car speakers.
When no external device is
d
connected to rear AUX terminal,
"AUX" is displayed, and press
[SRC] to return to "RADIO"
10
AUX Connector (3.5 mm ø stereo)
From line output of external sound/audio device (ex. Silicon audio
player, HDD player, etc.)
When device connected to the rear AUX terminal of
this unit, the sound of connected audio device can be
output from car speakers.
(Return to "RADIO")
Notes:
¡ When an output signal from the rear AUX terminal
is detected, this unit automatically changes the
source to AUX2. If this unit no longer detects this
input signal, the source immediately before AUX2
resumes.
Radio
¡ When an output signal from the rear AUX terminal
is detected in the power-off mode of this unit, the
(a
page 14)
power is turned on with the AUX2 source selected.
If this unit no longer detects this input signal be-
fore manually selecting other sources, the power
of this unit is turned off.
USB
(a
page 16)
iPod
(a
page 19)
AUX1
[SRC]
selects a source.
[POWER]
toggles power on/off.
p
AUX2
d
®
Bluetooth
(a
page 22)
d
Advertisement
Table of Contents
