Turning The Power On/Off; Symbols Used In These Operating Instructions; Display Language; Dialling Mode (Tone/Pulse) - Panasonic KX-TG7100CX Operating Instructions Manual

TG7100CX(e).book Page 9 Tuesday, May 23, 2006 9:02 AM
complete cycles of charge/discharge
(use).
L Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
L Even after the handset is fully charged,
the handset can be left on the base unit
without any ill effect on the batteries.
L The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.

Turning the power on/off

Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
operating instructions
Symbol Meaning
{j/OK} Press {j/OK}.
Proceed to the next operation.
i
" " Select the words in quotations
shown on the display (e.g.,
"Handset Setup") by
pressing {^} or {V}.

Display language

1
{j/OK}
2
Press {^} or {V} to select "Handset
Setup". i {>}
3
Press {^} or {V} to select "Display
Setup". i {>}
4
Press {^} or {V} to select "Select
Language". i {>}
5
Press {^} or {V} to select the desired
language. i {>} i {ih}
Note:
L If you select a language you cannot read,
press {ih}, press {j/OK}, press {^} 3
times, press {>}, press {V} 2 times, press
{>}, press {V}, press {>}, select the
desired language, press {>}, then press
{ih}.

Dialling mode (tone/pulse)

Changing the dialling mode depending on
your telephone line service.
"Tone": Select when you have a touch tone
service.
"Pulse": Select when you have rotary or
pulse service.
1
{j/OK}
2
Press {^} or {V} to select "Base Unit
Setup". i {>}
3
Press {^} or {V} to select "Call
Options". i {>}
4
Press {^} or {V} to select "Dial Mode".
i {>}
5
Press {^} or {V} to select the desired
setting. i {>} i {ih}
Preparation
9