Switching Dvd Soundtracks; Switching Audio Channels - Pioneer RCS-77H Operating Insructions

Playback

Switching DVD soundtracks

DVD-Video
When playing a DVD disc recorded with two or more
soundtracks (often in different languages), you can
switch the soundtrack during playback.
Check the disc packaging for details of the soundtrack
options.
REC STOP REC
SURROUND ADVANCED
AUDIO SUBTITLE
TV
CHANNEL
SHIFT TV CONTROL
• Press AUDIO repeatedly to select an audio
soundtrack.
Audio : 1/2
• The sound may drop out for a few seconds when
switching soundtracks.
• Some discs feature both Dolby Digital and DTS
soundtracks. There is no analog audio output when
DTS is selected. To listen to the DTS soundtrack,
connect this recorder to a DTS decoder or AV amp/
receiver with built-in DTS decoder via the digital
output.
Note
1.• Some discs only allow you to change audio language from the disc menu. Press TOP MENU to access.
• To set audio language preferences, see Audio Language on page 133.
2.Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 135).
3.• When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
switch the audio channel. Set Dolby Digital Out to Dolby Digital
if you need to switch the audio channel.
• When playing a Dolby Digital source (HDD or DVD), you can also switch channels from the Dual Mono menu of the receiver subwoofer—
see Dual mono setting on page 30.
1
ONE TOUCH
REC MODE
COPY
SOUND TIMER REC
ANGLE PLAY MODE
INPUT
VOLUME
TV/DVD
TV DIRECT
REC
Dolby Digital 2/0CH

Switching audio channels

VR mode HDD CD
WMA/MP3
2
For HDD and VR mode content recorded with bilingual
audio, you can switch between left (L) channel, right (R)
3
channel, or both (L+R).
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
Some Super VCDs have two soundtracks. With these
discs you can switch between the two soundtracks as
well as individual channels in each.
REC STOP REC
SURROUND
AUDIO
TV
SHIFT
1 To display/switch the audio channel, press
AUDIO repeatedly.
The audio channel(s) currently playing are indicated on-
screen.
VR mode HDD
• L+R – Both channels (default)
• L – Left channel only
• R – Right channel only
CD Video CD WMA/MP3
• Stereo – Stereo (default)
• 1/L – Left channel only
• 2/R – Right channel only
Super VCD
• 1 Stereo – Soundtrack 1 / Stereo (default)
• 1 L – Soundtrack 1 / Left channel
PCM (see Dolby Digital Out on page 133) or listen via the analog outputs
Video CD Super VCD
ONE TOUCH
REC MODE
COPY
ADVANCED SOUND TIMER REC
SUBTITLE ANGLE PLAY MODE
INPUT
CHANNEL VOLUME
TV/DVD
TV DIRECT
TV CONTROL
REC
07
99
En