Other Connections; Connecting Auxiliary Components; Listening To An External Audio Source - Pioneer RCS-77H Operating Insructions

Other connections

Chapter 6
Other connections

Connecting auxiliary components

This system has both optical and caxial-type digital
inputs. Use these to connect external components, such
as your MD or CD-R recorder.
SYSTEM
CONTROL SPEAKERS
CONNECTOR
OUT SUB WOOFER R SURROUND L
USE ONLY WITH
DISPLAY UNIT
CENTER R FRONT L
AC IN
CD recorder, etc.
• Connect one of the DIGITAL audio input jacks on
the rear panel to the digital output of an external
playback component.
These include digital components such as an MD player,
digital satellite, or a game system.
For an optical connection, use an optical cable to
connect the DIGITAL (OPTICAL) jack to the optical
output of an external playback component.
For a coaxial connection, use a coaxial cable (similar to
the supplied video cable) to connect the DVD/DVR1
(COAXIAL) jack to the coaxial output of an external play-
back component.
SX-SW77
ANTENNA
FM AM
UNBAL 75Ω LOOP ANTENNA
AUDIO INPUT
DIGITAL
DVD/DVR 1 DVD/DVR 2 DIGITAL ANALOG
(COAXIAL) (OPTICAL) (OPTICAL)
L
R
DIGITAL OUT
(OPTICAL)
DIGITAL OUT
(COAXIAL)

Listening to an external audio source

You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include your TV. See also Connecting auxiliary
components above.
RECORDER
–
HDD DVD
1 If the system isn't already on, press
to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2 Use the AUDIO INPUT button to select an audio
input source.
DVD/DVR1
ANALOG
3 If necessary, start playback of the external
source.
RECEIVER
MUTE
VOLUME
+
FM/AM AUDIO INPUT
CHANNEL
VIDEO INPUT
RECEIVER
DVD/DVR2
DIGITAL
06
31
En