Related Manuals for Pioneer HTZ353DVD
Summary of Contents for Pioneer HTZ353DVD
- Page 1 HTZ353DVD DVD/CD Receiver XV-DV353 Speaker System S-DV353 HTZ656DVD DVD/CD Receiver XV-DV656 Speaker System S-DV1T S-DV1SW Operating Instructions...
- Page 2 Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference.
- Page 3 When you find it outlet you want to use, the plug must be removed damaged, ask your nearest PIONEER authorized and appropriate one fitted. Replacement and service center or your dealer for a replacement.
-
Page 4: Table Of Contents
Boosting the bass level ....16 About progressive scan video ..32 Using this unit with a Pioneer plasma 04 Disc playback features display. - Page 5 Disc / content format playback compatibility ..... . 37 Disc compatibility table ... . . 38 About DVD+R/DVD+RW compatibility .
-
Page 6: Controls And Displays
Controls and displays Chapter 1 Controls and displays Front panel Remote control TUNER STANDBY OPEN/CLOSE DVD/CD VOLUME STANDBY/ON DVD/CD (FM/AM) OPEN/ CLOSE LINE AUDIO SUBTITLE ANGLE ZOOM CLEAR DISPLAY TOP MENU MENU TUNE SETUP SR＋ ENTER HOME MENU RETURN MCACC TUNE TEST TONE SOUND... - Page 7 15 SLEEP (page 14) or switches to stereo playback Press to set the sleep timer (page 37). (page 15). ADVANCED – Selects a Pioneer original 16 MUTE surround mode (page 15) . Mutes the sound (press again to cancel). SOUND – Accesses the sound menu to 17 VOLUME +/–...
-
Page 8: Display
Controls and displays Display PRGSVE SOUND DTS F.SURR. RPT -1 kHz PGM MHz RDM kHz / MHz Lights during playback of a DTS source Indicates the frequency unit shown in the character display (kHz for AM, MHz for FM). (page 14). PRGSVE 10 Character display Lights when progressive scan video output is... -
Page 9: Getting Started
Getting started Chapter 2 Getting started After placing your speakers, see Using the Home theater sound setup Auto MCACC setup for optimal surround sound below to complete your surround setup. Place your speakers as shown below for optimal surround sound (see the Speaker Setup Guide for more placement tips). -
Page 10: Using The On-Screen Displays
Getting started Connect the microphone to the MCACC When the MCACC setup is complete, the MIC jack on the rear panel. volume level returns to normal and COMPLETE shows in the display, indicating that the MCACC setup is complete and ANTENNA COMPONENT VIDEO... -
Page 11: Playing Discs
Getting started Basic playback controls Playing discs The following table shows the basic controls on The basic playback controls for playing DVD, the remote for playing discs . You can find CD, Video CD/Super VCD, DivX video and other playback features in the chapter 4. WMA/MP3/MPEG-4 AAC discs are covered Button What it does here. -
Page 12: Dvd-Video Disc Menus
Getting started If you want to clear the resume point, press Button What it does (stop) while RESUME is displayed. Displays the next menu page (if there is one). DVD-Video disc menus Many DVD-Video discs contain menus from which you can select what you want to watch. Listening to the radio Sometimes DVD-Video menus are displayed The tuner can receive both FM and AM... -
Page 13: Reducing Am Reception Noise
Getting started Select FM AUTO above to switch back to auto- Listening to other sources stereo mode (the stereo indicator ( ) lights when receiving a stereo broadcast). You can connect auxiliary sources (TV, satellite receiver, etc.) to this unit for playback through Reducing AM reception noise the speaker system. -
Page 14: Listening To Your System
Listening to your system Chapter 3 Listening to your system • MOVIE (Dolby Pro Logic II Movie) – Pro Auto listening mode Logic II 5.1 channel surround sound, especially suited to movie sources (use The Auto listening mode is the simplest way to with any two-channel source) listen to any source as it was mastered: the output from the speakers mirrors the channels... -
Page 15: Using Front Surround
Listening to your system • See Using Front Surround above to get the Using Front Surround best results from a Front surround 3-spot setup (page 9). XV-DV353 only The Front Surround mode is effective when you TUNE TEST TONE SOUND RETRIEVER SURROUND ADVANCED... -
Page 16: Using The Sound Retriever
Listening to your system Press SOUND and use to select Press SOUND and use to select MCACC EQ then press ENTER . TONE then press ENTER . to select the option you want to to select EQ ON or EQ OFF then adjust and press ENTER . -
Page 17: Disc Playback Features
Disc playback features Chapter 4 Disc playback features During playback, press (pause). Important Press and hold until slow • Many of the functions covered in this motion playback starts. chapter apply to DVD discs, Video CDs/ Press repeatedly to change the slow motion Super VCDs, CDs, DivX video and WMA/ speed (shown on-screen). -
Page 18: Browsing Dvd Or Video Cd/Super Vcd Discs With The Disc Navigator
Disc playback features While the slideshow is running: The options available depend on the kind of disc loaded and whether the disc is playing or Button What it does not, but include: Pauses the slideshow (or audio); • Title – Titles from a DVD-Video disc. press again to restart. -
Page 19: Browsing Wma, Mp3, Mpeg-4 Aac, Divx Video And Jpeg Files With The Disc Navigator
Disc playback features Browsing WMA, MP3, MPEG-4 AAC, DivX video and JPEG files • You can also play a JPEG slideshow while listening to WMA/MP3/MPEG-4 AAC with the Disc Navigator playback. Simply select the audio file you Use the Disc Navigator to find a particular file want to listen to followed by the JPEG from or folder by filename. -
Page 20: Using Random Play
Disc playback features During playback, press HOME MENU and Button What it does select ‘ Play Mode ’. Returns to the beginning of the Select ‘Repeat’ then select a repeat play current track/title/chapter; option. further presses select another If program play is active, select Program random track/title/chapter. -
Page 21: Other Functions Available From The Program Menu
Disc playback features To play the program list, press (play). Select a search mode. Program play remains active until you turn off • The disc must be playing in order to use program play (see below), erase the program time search. list (see below), eject the disc or switch off. -
Page 22: Zooming The Screen
Disc playback features Zooming the screen Using the zoom feature you can magnify a part of the screen by a factor of 2 or 4, while watching a DVD, DivX video title or Video CD/ Super VCD or playing a JPEG disc. During playback, use the ZOOM button to select the zoom factor (Normal, 2x or 4x). -
Page 23: Usb Playback
(MP3 players) of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback. • Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit. -
Page 24: Scanning Files
USB playback Button What it does Scanning files MENU Displays the Navigator screen You can fast-scan forward or backward at (see below). various different speeds. • During playback, press Browsing files with the Press repeatedly to increase the scanning Navigator speed (shown on-screen). -
Page 25: Surround Sound Settings
Surround sound settings Chapter 6 Surround sound settings • SL – Surround left speaker Using the Setup menu • SW – Subwoofer From the Setup menu you can access all the The channel level range is ± 10 dB. surround sound settings of the system Speaker distance setting including channel levels, speaker distances Specifies the distance from your listening... -
Page 26: Video Adjust Menu
Video Adjust menu Chapter 7 Video Adjust menu Video Adjust menu From the Video Adjust screen you can adjust settings that affect picture presentation. Press HOME MENU and select ‘Video Adjust’ from the on-screen display. Video Adjust Make settings using ENTER . -
Page 27: Initial Settings Menu
Initial Settings menu Chapter 8 Initial Settings menu Press DVD/CD . Using the Initial Settings menu With playback stopped, press HOME The Initial Settings menu provides audio and MENU and select ‘Initial Settings’. video output settings, parental lock settings, and display settings, among others. Initial Settings If an option is grayed out it means that it cannot be changed at the current time. -
Page 28: Language Settings
Initial Settings menu Setting Option What it means HDMI Color Full range RGB If colors are weak, this gives brighter colors and deeper black XV-DV656 only (default setting for HDMI-compatible DVI devices). (See Connecting using Use this setting if colors appear overly rich on the Full Range HDMI on page 34) RGB setting. -
Page 29: Options Settings
Initial Settings menu Options settings Setting Option What it means Parental Lock – See Parental Lock below. DivX(R) VOD Display See About DivX® VOD content below. Parental Lock Setting/changing the Parental Lock • Default level: Off; Default password: none; Select ‘Level Change’. Default Country/Area code: us (2119) Use number buttons to enter your To give you some control over what your... -
Page 30: About Divx® Vod Content
Initial Settings menu ® disc (thereby using up one of the remaining About DivX VOD content plays), or stopping. If you load a disc that In order to play DivX VOD (video on demand) contains expired DivX VOD content (for content on this player, you first need to register example, content that has zero remaining the player with your DivX VOD content... -
Page 31: Other Connections
Other connections Chapter 9 Other connections • Connect the LINE AUDIO IN jacks to the Connecting external antennas analog outputs of an external playback component. For an external AM antenna, use 5 m to 6 m of Connect using RCA pin-plug stereo cables. vinyl-insulated wire and set up either indoors or outdoors. -
Page 32: Connecting Using The Component Video Output
3 This system is compatible with all Pioneer plasma displays from 2003 onward. 4 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus- tomer Support division for more information on obtaining an SR+ cable. -
Page 33: Sr+ Setup For Pioneer Plasma Displays
TVTN switches the plasma display to need to make a few settings in the unit. See its built-in tuner and NONE leaves the plasma SR+ Setup for Pioneer plasma displays below display input as is (no switching takes place). for detailed instructions. -
Page 34: Connecting Using Hdmi
Other connections Switching the HDMI audio setting Connecting using HDMI To listen to audio from the HDMI interconnect, XV-DV656 only make sure you’ve specified the HDMI audio output setting. If you have a HDMI or DVI (with HDCP) equipped monitor or display, you can connect Switch the system into standby. -
Page 35: About Hdmi
Other connections About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. -
Page 36: Additional Information
Additional information Chapter 10 Additional information country or region’s system. However, this may Optional system settings restrict the kinds of disc you can watch. See the table for the kinds of discs compatible with All the available settings in the standby setup menu are listed below. -
Page 37: Setting The Sleep Timer
Additional information Key lock setting Disc / content format playback • LOCK ON – Makes the front panel buttons and controls inoperative. compatibility • LOCK OFF – Restores regular use of the This player is compatible with a wide range of front panel buttons and controls. -
Page 38: Disc Compatibility Table
Additional information About DualDisc playback Media Compatible formats A DualDisc is a new two -sided disc, one side Compressed • MPEG-1 Audio Layer 3 (MP3), of which contains DVD content video, audio, audio Windows Media Audio (WMA), MPEG- etc. while the other side contains non-DVD 4 AAC content such as digital audio material. -
Page 39: About Mpeg-4 Aac
Additional information About MPEG-4 AAC individual DivX video files are called ‘Titles’. When naming files/titles on a CD-R/RW or Advanced Audio Coding (AAC) is at the core of DVD-R/RW disc prior to burning, keep in mind the MPEG-4 AAC standard, which incorporates that by default they will play in alphabetical MPEG-2 AAC, forming the basis of the MPEG-4 order. -
Page 40: Using And Taking Care Of Discs
This unit is designed for use with conventional, may be exposed to smoke or steam. fully circular discs only. Pioneer disclaims all Use on a thick rug or carpet, or cover with liability arising in connection with the use of cloth—this may prevent proper cooling of the... -
Page 41: Cleaning The Pickup Lens
Set to 4:3 (Letter Box), widescreen malfunction due to dust or dirt, consult your discs are shown with black bars top nearest Pioneer authorized service center. and bottom. Although lens cleaners are commercially available, we do not recommend using them since some may damage the lens. -
Page 42: Troubleshooting
• Check that there’s nothing mistakenly plugged into the CONTROL IN jack. • If the system is connected to a Pioneer plasma display with an SR+ cable, check that the plasma display is switched on. Point the remote control at the plasma display in order to operate the system. -
Page 43: Dvd/Cd/Video Cd Player
Additional information DVD/CD/Video CD player Problem Remedy The disc is ejected • Clean the disc and align the disc properly in the disc guide. automatically after • If the region number on a DVD-video disc does not match the number on the loading. -
Page 44: Tuner
Additional information Problem Remedy Files don’t show up in • The files on the disc must be named with the correct file extension: .mp3 for MP3 the Disc Navigator/ files; .wma for WMA files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or Photo Browser. -
Page 45: Hdmi Connection (Xv-Dv656 Only)
Additional information HDMI connection (XV-DV656 only) Problem Remedy • See Switching the HDMI audio setting on page 34 to make sure that AUDIO ON No HDMI audio output. is selected. No HDMI video output • Make sure that you’ve selected this player as the HDMI input in the settings for the component you’re using (refer to the component’s instruction manual). -
Page 46: Resetting The System
See also Resetting the HDMI connection on page 34 if the problem persists. EEP ERR • Contact your Pioneer authorized service center or your dealer for servicing. EXIT • Appears when a menu is automatically exited after a set period of inactivity. -
Page 47: Language Code List
Additional information Language code list Language (Language code letter), Language code Japanese (ja), 1001 Estonian (et), 0520 Lingala (ln), 1214 Slovak (sk), 1911 English (en), 0514 Basque (eu), 0521 Laothian (lo), 1215 Slovenian (sl), 1912 French (fr), 0618 Persian (fa), 0601 Lithuanian (lt), 1220 Samoan (sm), 1913 German (de), 0405... -
Page 48: Specifications
Additional information S-DV353 Speaker system Specifications • Front/surround speakers Enclosure ..Closed-box bookshelf type • Amplifier section (magnetically shielded) RMS Power Output: System ....7.7 cm 1-way system Front, Center, Surround . - Page 49 Additional information S-DV1T Speaker system Note • Front/surround speakers • Specifications and design subject to Enclosure ..Closed-box floorstanding type possible modification without notice, due (magnetically shielded) to improvements. System ..... . .2-way system Speakers: This product includes FontAvenue®...
- Page 50 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270 K002_A_En <06F000001>...