Connection Example 3. Av Amplifier - Pioneer DVD-V555 Operating Insructions

Connection example 3.
AV amplifier
¶ Connect this player's audio output jacks to an amplifier's CD, LD, AUX or other audio input jacks. (Do not connect to PHONO jacks.)
¶ Connect this player's video output jack to the amplifier's video input jack.
¶ When connecting to a component bearing the Pioneer Î mark:
If you use a commercially available cord with a mini plug (no resistance) to connect this player's CONTROL IN jack to the
control output jack of another component bearing the Î mark, you can control the player as though it were a component in a
system (system control).
If you connect for system control, you cannot operate the player directly by pointing the remote control at it and pressing buttons.
When controlling as a system, be sure to make connection to the amplifier using an audio cord, even when using only digital components.
For more details, refer to the connected component's operation manual.
¶ Surround sound can be enjoyed with amplifiers that have a built-in Dolby Pro Logic decoder.
60
<VRB1210>
AUDIO OUT
R
DIGITAL OUT VIDEO OUT S-VIDEO OUT
OPT. 1
CONTROL
IN
2
CONTROL
VIDEO IN
AUDIO IN
OUT
AV amplifier
L
ATTENUATOR
ON OFF
AC IN
Note
Cables can be found at your local audio/video
dealer.
By connecting to a regular AV
amplifier or stereo amp, you
can enjoy playback with
improved sound quality.
Finally, connect
to a home
wall outlet.