Easy Connections - Pioneer DVR-541H-S Operating Instructions Manual

Dvd recorder
Hide thumbs Also See for DVR-541H-S:
Table of Contents

Advertisement

Connecting up
02

Easy connections

The setup described here is a basic
configuration that allows you to record TV
programs on both this recorder and your
VCR. When watching recordings from this
recorder, set your TV to input 1; switch to
input 2 to watch a video playing in the VCR.
Important
• This recorder is equipped with copy
protection technology. Do not connect
this recorder to your TV via a VCR (or your
VCR via this recorder) using AV cables,
as the picture from this recorder will not
appear properly on your TV.
• Before making or changing any rear
panel connections, make sure that all
components are switched off and
unplugged from the wall outlet.
A/V
IN 1
TV
4
VCR
AC IN
16
En
A/V
IN 2
ANTENNA
IN
3
ANTENNA
A/V
OUT
OUT
ANTENNA
IN
2
Y
OUTPUT 1
INPUT 1/AUTO START REC
OUTPUT 1
R
L
R
L
P
B
DIGITAL
CONTROL
OUT
OUT
P
R
ANTENNA
COAXIAL
IN
COMPONENT
AUDIO
VIDEO
AUDIO
VIDEO
S-VIDEO
S-VIDEO
VIDEO OUT
OUTPUT 2
INPUT 3
ANTENNA
OUT
1
Antenna/cable TV
wall outlet
1
Connect your TV antenna/cable TV
outlet to the ANTENNA IN (RF IN) jack on
this recorder.
2
Use an RF antenna cable (one is
supplied) to connect the ANTENNA OUT
jack on this recorder to the antenna input
on your VCR.
• If you are not connecting a VCR in the
chain, connect this recorder directly to
your TV and skip the next step.
3
Use an RF antenna cable to connect
the antenna output on your VCR to the
antenna input on your TV.
4
Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) to a set of audio/
video inputs on your TV.
Use the supplied three-pin audio/video
cable. It is color-coded to help you match
them up (red/white for the right/left audio
connections and yellow for video in/outs).
Make sure you match up the left and right
outputs with their corresponding inputs for
correct stereo sound.
5
Connect your VCR to your TV (A/V IN
2 above) using a set of audio and video
cables.
5
• See the following page if you want to use
S-video or component video cables for
the video connection.
ANTENNA
IN (RF IN)
IN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-7000Dvr-310Dvr-510h

Table of Contents