Additional Connections; Adding A Vcr: Connecting To A Television And A Video Cassette Recorder - Panasonic Diga DMR-EX769EB Operating Instructions Manual

Additional Connections

Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup menu is set to "RGB 1 (without component)" or "RGB 2 (without component)" (
Make "AV2 Input" settings in the Setup menu (
Use of the RF coaxial cable
 Keep the RF coaxial cables as far away as possible from other cables.
 Do not roll up the RF coaxial cables.
 Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
Connect AC mains lead only after all other connections are complete.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.

Adding a VCR: Connecting to a Television and a Video Cassette Recorder

The RF coaxial cable cannot
be used for showing pictures
from the unit. The unit must
be connected using another
method, e.g.21-pin Scart cable
to show pictures from the unit
on the television set.
To record from a VCR
Refer to "Recording from an External Device" (
Downloaded From Disc-Player.com Panasonic Manuals
68
65).
RF coaxial cable
21-pin Scart cable
HDMI cable
To the aerial
RF IN
RF OUT
RF IN
RF OUT
VCR
34).
TV
RF IN
HDMI IN
AV
This unit
AV1(TV)
HDMI AV
AV2 (EXT)
OUT
AV
40).
65).
You can enjoy
high-quality picture
by adding
the HDMI cable
connection 12