Changing The Player Settings - Panasonic DVD-S97 Operating Instructions Manual

Changing the player settings

1
SETUP
Shows Setup menu.
≥The settings remain intact even if you switch the unit to standby.
≥Underlined items are the factory preset.
∫ "Disc" tab
Audio
Choose the audio language.
Subtitle
Choose the subtitle language.
Menus
Choose the language for disc menus.
Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions.
∫ "Video" tab
TV Aspect
Choose the setting to suit your television
and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with an AV amplifier and
Plasma display, adjust if you notice the
audio is out of sync with the video.
Convert from PAL
Video Out (AV/Component)
Choose the video signal format to be output
from the SCART and COMPONENT VIDEO
OUT terminals.
Still Mode
Specify the type of picture shown when paused.
NTSC Disc Output
Choose PAL 60 or NTSC output when
playing NTSC discs.
Picture/Video Output
Choose the video signal format to be
output for JPEG and MPEG4.
∫ "Audio" tab
PCM Digital Output
Check the digital input limitations of the
equipment you connect using COAXIAL or
OPTICAL terminal and select the maximum
sampling frequency of PCM digital output.
Dolby Digital
With COAXIAL, OPTICAL or HDMI AV
OUT connections ( page 4, 5)
DTS Digital Surround
With COAXIAL, OPTICAL or HDMI AV
OUT connections ( page 4, 5)
MPEG
With COAXIAL, OPTICAL or HDMI AV
OUT connections ( page 4, 5)
Dynamic Range Compression
Audio during Search
Speaker Settings
Choose the settings to suit your audio
system and the listening environment
( page 15, Changing the speaker setting
to suit your speakers).
14
2
Select
ENTER
Go right
Select the tab.
≥
English
≥
§4
Automatic
≥
English
≥Changing the menu language from QUICK SETUP also changes this setting.
Setting ratings (When level 8 is selected)
≥
8 No Limit
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
≥
4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥
4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥
16:9: Widescreen television (16:9)
≥
Standard (Direct View TV)
≥
Plasma TV
≥
0ms
≥
625 (576)p/50Hz: Picture output from a PAL disc is as PAL progressive.
≥
525 (480)p/60Hz: Picture output from a PAL disc is converted to NTSC progressive.
≥
§5
( page 4)
Video/YPbPr
≥
Automatic
≥
Frame: Overall quality is high, but the picture may appear blurred.
≥
PAL60: NTSC discs can be viewed on PAL television.
≥
NTSC: Output signal from NTSC discs remains as NTSC.
≥
Automatic
≥
NTSC/PAL60: Output will depend on "NTSC Disc Output" setting (
Off:
Up to 48 kHz: When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz: When connected to equipment compatible with 88.2 or 96 kHz
Up to 192 kHz: When connected to equipment compatible with 176.4 or 192 kHz
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz.
Read your equipment's operating instructions for details.
≥ ≥
Bitstream
≥ ≥
Bitstream
≥ ≥
PCM
≥
Off
≥
On: Adjusts for clarity even when the volume is low through compressing the range of the lowest sound
level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ ≥
On
Speaker Type
≥
Multi-channel: when 3 or more speakers are connected.
≥
2-channel:
Multi-channel Setting (If you select "Multi-channel")
≥
Speaker presence and size
3 4
Select
ENTER
Register
Select the item.
The QUICK SETUP enables successive settings of the items in the
shaded area.
≥ ≥
§1
(Language options) Original
≥ ≥
English (Language options)
≥ ≥
§1
(Language options) Other
≥ ≥
1 to 7 0 Lock All: To prevent play of discs without ratings levels.
≥
CRT Projector
≥ ≥ ≥
20ms 40ms 60ms
≥
S-Video/YPbPr
≥
Field: The picture is not blurred, but picture quality is lower.
≥
PAL
When not connected with COAXIAL or OPTICAL terminal
Select "Bitstream" when the equipment can decode the bitstream (digital
PCM
form of multi-channel data). Otherwise, select "PCM".
≥If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.
PCM
When audio is output from HDMI AV OUT terminal and the connected
equipment does not support the item selected, the actual output will
Bitstream
depend on the performance of the connected equipment.
Off
when 2 speakers are connected.
≥
Delay time
Select
1 2 3
4 5 6
ENTER
7 8 9
Register
0 10
Make the settings.
≥ ¢¢¢¢
§2 §3
Other
≥ ¢¢¢¢
§1 §3
Other
¢¢¢¢
§3
≥ ≥
LCD TV/Projector
≥ ≥
80ms 100ms
≥
RGB/No Output
above).
≥Channel balance
5
SETUP
Press to exit.
Projection TV