Changing The Player Settings; Reference - Panasonic DVD-S53 Operating Instructions Manual

Changing the player settings

1 2
Shows
Setup
menu.
• The settings remain intact even if you switch the unit to standby.
• Underlined items are the factory preset.
The QUICK SETUP enables successive settings of the items in the shaded area.
"DISC" menu

SETTING STATE Display the current setting of the items below
AUDIO
ENGLISH (LANGUAGE OPTIONS)
Choose the audio
OTHER ----
language.
SUBTITLE
AUTO
Choose the subtitle
OTHER ----
language.
MENUS
ENGLISH (LANGUAGE OPTIONS)
Choose the language
for disc menus.
RATINGS Setting ratings (When level 8 is selected)
Set a ratings level to 0 LOCK ALL: To prevent play of discs without ratings
limit DVD-Video play.
1 to 7: To prohibit play of DVD-Video with corresponding
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video
exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
PASSWORD
1. Select "CHANGE" and press [ENTER].
Change the password 2. Enter the current password with the numbered buttons,
for "RATINGS" then press [ENTER].
( above). 3. Enter the new password with the numbered buttons,
then press [ENTER].
If "VERIFY" is displayed, please verify the password
and insert it again.
18
3
Select
Select the
menu.
Register
1 ORIGINAL
3
4 ENGLISH (LANGUAGE OPTIONS)
3
1 OTHER ----
levels.
ratings recorded on them.
4
Select
Select the
item.
Register
 "VIDEO" menu
SETTING STATE
TV ASPECT
2
Choose the setting to suit your
television and preference.
TV TYPE
1
Select to suit the type of television.
TIME DELAY
When connected with an AV amplifier and Plasma display, adjust
3
if you notice the audio is out of sync with the video.
NTSC DISC OUT
Choose PAL60 or NTSC output
when playing NTSC discs.
STILL MODE
Specify the type of picture
shown when paused.
VIDEO OUT-SCART
5
Choose the video signal format
to be output from the SCART
and COMPONENT VIDEO
OUT terminals
VIDEO OUT (I/P)
Select "PROGRESSIVE" only
if connecting to a progressive
output compatible television.
Select
1 2 3
Make the
4 5 6
settings.
7 8 9
0
Register
Display the current setting of the items below
4:3PAN&SCAN 4:3LETTERBOX
16:9NORMAL 16:9SHRINK
STANDARD CRT LCD PROJECTION PLASMA
NTSC: Output signals from NTSC discs remains as NTSC.
PAL60: NTSC discs can be viewed on PAL television.
: "NTSC" is the factory preset.
Asia
AUTO
FIELD: The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may appear blurred.
VIDEO/YPbPr
S-VIDEO/YPbPr
RGB/NO OUTPUT
INTERLACE PROGRESSIVE
When you select "PROGRESSIVE", a message screen will appear.
• For progressive output, press [e] and then press [ENTER].
• Press [RETURN] to cancel.
5
Press to
exit.
4:3ZOOM
16:9ZOOM
0 ms 20 ms 40 ms
60 ms 80 ms 100 ms