On-Screen Menu 2/On-Screen Menu 3 - Panasonic DVD-S53 Operating Instructions Manual

Using On-Screen Menus
On-Screen Menu 2 (Video)
PICTURE MODE
ZOOM
DNR
TRANSFER MODE
SOURCE SELECT
(depends on disc)
DivX
On-Screen Menu 3 (Audio)
DIALOG ENHANCER
RE-MASTER
ADVANCED SURROUND
Note
You cannot use settings in On-Screen Menu 3 during pause, slow-motion, and search.
16
( page 13, Changing picture mode)
( page 14, Zoom)
( page 13, Reducing noise in pictures)
( page 14, Transfer mode)
When you select "AUTO" the constructing method of the DivX contents is automatically distinguished and output. If the picture is distorted,
select "INTERLACE" or "PROGRESSIVE" depending on which constructing method was used when the contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
( page 14, Dialogue enhancer)
Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz
DVD-V DVD-VR CD
This feature gives you a more natural sound by adding the higher frequency signals not recorded on the disc.
Discs recorded at 44.1 kHz or 48 kHz
WMA MP3
This feature reproduces the frequencies lost during recording to give you a sound closer to the original.
Press [e r] to select "OFF", "1", "2" or "3".
Setting Type of music DVD-V CD
1 High tempo (e.g., pop and rock)
2 Various tempos (e.g., jazz)
3 Low tempo (e.g., classical)
OFF Off
• When connecting with DIGITAL AUDIO OUT terminal, the actual output sampling frequency depends on "PCM OUTPUT" setting in
"AUDIO" menu ( page 19).
• This feature may not work when connected with HDMI AV OUT terminals.
• This may not work depending on the disc's recording.
• This does not work with on DVD-RAM or DVD-R/RW.
MP3
( page 13, Enjoying advanced surround)
Effect level
WMA MP3
Light
Medium
Strong
Off