STEP 1 Connection
Enjoying surround sound
Amplifier with a built-in decoder or a
decoder-amplifier combination
•
You cannot use DTS Digital Surround
decoders not suited to DVD.
Set "AUDIO OUT" to "OFF"
( page 19, "HDMI" menu), and change
"PCM OUTPUT", "DOLBY DIGITAL",
"DTS" and "MPEG" ( page 19, "AUDIO"
menu).
STEP 2 The remote control
Batteries
R6/LR6, AA
STEP 3 QUICK SETUP
Turn on the television and select the appropriate video input on the television.
1
Power on.
8
To change these settings later, select "QUICK SETUP" ( page 19, "OTHERS" menu).
COAXIAL IN
Coaxial cable
Back of the unit
•
Insert so the poles (4 and 3) match those in the remote
control.
•
Do not use rechargeable type batteries.
Do not:
•
mix old and new batteries.
•
use different types at the same time.
•
heat or expose to flame.
•
take apart or short circuit.
•
attempt to recharge alkaline or manganese batteries.
•
use batteries if the covering has been peeled off.
2
3
Shows QUICK
SETUP screen.
Connect the AC mains lead last
FOR THE UNITED KINGDOM AND REPUBLIC OF IRELAND ONLY
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
AC mains lead (included)
To household mains socket
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Use
Aim at the remote control sensor ( page 9), avoiding obstacles,
at a maximum range of 7 m directly in front of the unit.
Select
Register
Follow the message and
make the settings.
AC IN
4
5
Press to finish
Press to exit.
QUICK SETUP.