Step 1 Connection To A Television - Panasonic DVD-F87 Operating Instructions Manual

STEP 1
≥ Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥ Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Connect the terminals of the same color.
WITH
R
§
You can connect the audio cable to the 2-
channel audio input terminals of an analog
amplifier or system component to enjoy
stereo.
∫ Enjoying multi-channel surround sound
WITH
COAXIAL IN
Amplifier with a built-in decoder or
a decoder-amplifier combination
COAXIAL IN
Coaxial cable
\
∫ Connect the AC power supply cord last
To household AC
Downloaded From Disc-Player.com Panasonic Manuals
outlet
4
Connection to a television
VIDEO IN or S VIDEO IN
AUDIO IN S VIDEO
VIDEO
L
IN
§
S video cable
Audio/video
cable (included)
COMPONENT VIDEO OUT
2 c h (480P/480I) ( )
L P Y
B B
R P
R
VIDEO OUT S VIDEO OUT
When using this connection, the audio cable
(red and white plugs) should also be
connected.
≥Change "PCM Digital Output",
"Dolby Digital", "DTS Digital
Surround" and "MPEG
\Australia\and\N.Z.]" in "Audio" tab
( page 12).
AUDIO OUT
DIGITAL
5 . 1 c h
AUDIO OUT
( PCM/
L L
BITSTREAM )
COAXIAL
CENTER
R R
SUB-
WOOFER SURROUND FRONT
AC power supply cord
(included)
Television
WITH
COMPONENT VIDEO IN
AUDIO IN
IN
R L
Not used
Audio/video
cable
(included)
COMPONENT VIDEO OUT
(480P/480I)
2 c h
L P
B
R P
R
[U.S.A.[and\Canada[
≥Select "Darker" from the "Black
Level Control" in the "Video"
tab ( page 12).
Back of the unit
[DVD-F87]only[
Amplifier
AUDIO IN 5.1ch
To obtain maximum performance of DVD-Audio multi-
channel linear PCM sound, this connection is recommended.
Audio cable
Connect cables to
terminals
corresponding to the
speakers you have
connected.
DIGITAL
2 c h AUDIO OUT
( PCM/
L
BITSTREAM )
COAXIAL
R
Back of the unit
Conserving power
This unit consumes a small amount of power, even when it is turned off
(approx. 0.7 W).
To save power when the unit is not to be used for a long time, unplug it
from the household AC outlet.
COMPONENT
VIDEO IN
Video cables
To enjoy progressive video
Y
Connect to a progressive output
compatible television.
1 ]DVD-F87]
Select "Enable" in the progressive
output setting in QUICK SETUP
( page 5).
]DVD-F86/DVD-F84]
VIDEO OUT S VIDEO OUT
Press [PROGRESSIVE OUT] on
the main unit.
2 Set "Video Output Mode" in
Picture Menu to "480P" (
10).
All Panasonic televisions with 480P
input connectors are compatible.
Consult the manufacturer if you have
another brand of television.
WITH
SURROUND FRONT
CENTER SUBWOOFER
(L) (R) (L) (R)
AUDIO OUT
5 . 1 c h
2 c h
L L L
CENTER
R R R
SUB-
WOOFER SURROUND FRONT
page
≥Change the
"Speaker Setting"
in the "Audio" tab
( page 12)