Printing Using Pictbridge; Connecting The Camera To The Printer - Pentax OPTIO L60 Operating Manual

Printing Using PictBridge

By connecting the camera to a printer that supports PictBridge using
the USB cable (I-USB7) provided, you can print images directly from
the camera without using a computer. Connect the camera to the printer
and select the images you want to print and the number of copies on
the camera.
• It is recommended to use the optional AC adapter kit K-AC78 when the
camera is connected to the printer. The printer may not work properly
or the image data may be lost if the battery runs out of power while
the camera is connected to the printer.
• Do not disconnect the USB cable during data transfer.
• If the picture already has the date and/or time imprinted on it (p.106),
do not set [Date] O (On) in PictBridge setting. If you select O (On),
the imprinted date and/or time may overlap.
• Depending on the model of printer, not all the settings made on the
camera (such as print settings and DPOF settings) may be valid.
• A printing error may occur if the selected number of copies exceeds 500.
• Printing the index of the images (printing multiple images on a single
sheet) cannot be performed directly from the camera. Make the settings
on a printer supporting index printing function or use a computer.

Connecting the Camera to the Printer

1
Select [PictBridge] for the [USB Connection] mode on
the [W Setting] menu.
Refer to "Changing the USB Connection Mode" (p.183).
2
Turn off the camera.
3
Connect the camera to the printer using the USB cable.
4
Turn on the printer.
5
161