Printing Using Pictbridge; Connecting The Camera To The Printer - Pentax Optio Optio WPi Operating Manual

Printing Using PictBridge

By connecting the camera to a printer that supports PictBridge using the
USB cable (I-USB7) provided, you can print images directly from the
camera without using a PC. Connect the camera to the printer and select
the images you want to print and the number of copies on the camera.
• You are recommended to use the AC adapter D-AC8 when the
camera is connected to the printer. The printer may not work
properly or the image data may be lost if the battery runs out of
power while the camera is connected to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the
camera (such as print settings and DPOF settings) may be valid.
• A printing error may occur if the selected number of copies
exceeds 500.
• You cannot use the camera to select multiple images for printing on
a single sheet. Make the settings on the printer. For details, refer to
the operating manual for your printer.

Connecting the Camera to the Printer

1
Select [PictBridge] for the [USB Connection] mode on
the [u Setting] menu.
Refer to "Changing the USB Connection Mode" (p.160).
2
Turn off the camera.
3
Connect the camera to the printer using the USB cable
provided.
4
Turn the printer on.
5
When the printer is ready to print,
turn the camera on.
The printing mode selection screen
appears.
Select printing mode Select printing mode
All Images
Select image
DPOF setting
OK OK OK
OK
6
139